First identify the connect buttons which are on the receiver which plugs into the PC, and under the keyboard and the mouse. Step 1: Plug the RF Receiver in your computer (PS2 port or USB port). For best result, please plug the RF Receiver in the Front Side USB Port. Step 2: Push the connect button on the RF Receiver. The Signal LED will start to blink. Step 3: Push the connect button on the back of the Wireless Mouse. Please note that this step must be completed within 8 seconds after Step 2. Step 4: When the RF Receiver and the Wireless Mouse are connected, the Signal LED will blink faster for a while, it means mouse ID setting has been completed. Step 5: Push the connect button on the back of the wireless keyboard. Step 6: Push the connect button on the RF Receiver. The Signal LED will start to blink. Please note that this step must be completed within 8 seconds after Step 5. Step 7: Click "Space" key, Once the receiver and the wireless keyboard are connected, the Signal LED will blink faster for a while. It means all ID setting has been completed. If the Wireless Mouse does not work properly, please go back to Step 2. (In case, the ID is used by other users or devices, please just repeat this reset procedure.) I searched google for hours and never found this so there now is a copy online. Suggest you print it and keep in a safe place. Return to connect.gi Index